R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

525
6602 HSR6602 6604/6608/6616
1 to 100000 1 to 1000100
• 1 to 100100 when using the RPE-X1 MPU
• 1 to 500100 when using the RSE-X1 MPU
• 1 to 500100 when using the MCP MPU
warn-threshold: Specifies the warning threshold in percentage, in the range of 1 to 100. If the warning
threshold is exceeded, an alarm message is generated, but routes can still be learned. If the maximum
number is reached, no more routes are received.
simply-alert: Enables the topology to add new routes and generate a syslog message when the
maximum number is exceeded.
Examples
# Configure the maximum number of routes supported by topology voice as 1000, and enable the
topology to add new routes and generate a syslog message when the maximum number is exceeded.
<Sysname> system-view
[Sysname] address-family ipv4
[Sysname-address-family ipv4] multiple-topology voice
[Sysname-multiple-topology-voice] routing-table limit 1000 simply-alert