R3303-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

159
Usage guidelines
If you do not specify any interface, this command displays the IP virtual fragment reassembly information
about all interfaces.
Examples
# Display the IP virtual fragment reassembly information about GigabitEthernet 3/0/1.
<Sysname> display ip virtual-reassembly interface gigabitethernet 3/0/1
GigabitEthernet3/0/1:
Virtual Fragment Reassembly is enabled.
Concurrent reassemblies(max-reassemblies): 64
Fragments per reassembly(max-fragments): 16
Reassembly timeout(timeout): 3 second(s)
Drop fragments: OFF
Current reassembly count: 12
Current fragment count: 48
Total reassembly count: 6950
Total reassembly failures: 9
Table 39 Command output
Field Description
Concurrent reassemblies (max-reassemblies) Maximum number of concurrent reassemblies.
Fragments per reassembly(max-fragments) Maximum number of fragments per reassembly.
Reassembly timeout(timeout) Timeout interval of each reassembly.
Drop fragments
OFF/ON means dropping all fragments is
disabled/enabled.
Current reassembly count Number of current reassemblies.
Current fragment count Number of current fragments.
Total reassembly count Total concurrent reassemblies, including the failed.
Total reassembly failures Total number of failed reassemblies.
display tcp statistics
Use display tcp statistics to display statistics of TCP traffic.
Syntax
display tcp statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level