R3303-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

185
Related commands
• ipv6 neighbor
• reset ipv6 neighbors
display ipv6 neighbors count
Use display ipv6 neighbors count to display the total number of neighbor entries meeting the specified
condition.
Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Displays the total number of neighbor entries for the specified card. The slot-number
argument specifies the slot that holds the card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
interface interface-type interface-number: Displays the total number of neighbor entries of a specific
interface.
vlan vlan-id: Displays the total number of neighbor entries of a specific VLAN whose ID is in the range
of 1 to 4094.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
vlan vlan-id No No
Yes on routers configured with SAP modules
that operate in bridge mode.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.