R3303-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

279
Tunneling configuration commands
bandwidth
Use bandwidth to set the expected bandwidth for the tunnel interface.
Use undo bandwidth to remove the setting.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
Tunnel interface view
Default command level
2: System level
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the expected bandwidth of an interface by querying the speed value of the MIB node
with third-party software.
The expected bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the expected bandwidth for interface Tunnel 0 to 10000 kbps.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] bandwidth 10000
description
Use description to configure a description for a tunnel interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a tunnel interface is Tunnelnumber Interface, for example, Tunnel1 Interface.
Views
Tunnel interface view