R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

99
Field Descri
p
tion
Maximum packet size Maximum packet size, a traffic parameter.
Minimum policed unit Minimum policed unit, a traffic parameter.
Bandwidth guarantees Guaranteed bandwidth, a reservation specifications parameter.
Delay guarantees Delay guarantee, a reservation specifications parameter.
QOS service QoS guarantee/control.
Resv Message
Reservation message received on a particular interface from next hop
(X.X.X.X)
Graceful Restart State
State of GR: stale or normal.
If this field is not supported, three hyphens (---) are displayed.
display mpls rsvp-te sender
Use display mpls rsvp-te sender to display RSVP-TE sender message information.
Syntax
display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the RSVP-TE sender message information on interface GigabitEthernet 2/1/1.
<Sysname> display mpls rsvp-te sender interface giabitethernet 2/1/1
Interface GigabitEthernet2/1/1
Tunnel Dest: 29.29.29.29 Ingress LSR ID: 19.19.19.19
LSP ID: 1 Session Tunnel ID: 1
Session Name: Tunnel0
Previous Hop Address: 101.101.101.1
Token bucket rate: 0.0 Token bucket size: 0.00
# Display the RSVP-TE sender message information on all interfaces.