R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

211
1025 VLAN abc
1026 VLAN -
# Display information about the PW class named 1234.
<Sysname> display pw-class 1234
PW-class name Transport mode Tunnel policy Reference count
1234 Ethernet abc 0
Table 88 Command output
Field Descri
p
tion
Tunnel policy
Name of the tunneling policy used by the PW class. If no tunneling policy is specified
for the PW class, this field displays a hyphen (-).
Reference count Number of times that the PW class is referenced.
display service-instance interface
Use display service-instance interface to display information about one or all service instances created
on an interface.
Syntax
display service-instance interface interface-type interface-number [ service-instance instance-id ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays information about service instances on an interface
specified by its type and number.
service-instance instance-id: Displays information about the specified service instance. The instance-id
argument represents the ID of the instance, in the range of 1 to 4096. If this option is not specified,
information about all service instances on the specified interface is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is supported only on routers with SAP-4EXPs.
Examples
# Display information about service instance 100 created on Ten-GigabitEthernet 1/0/1.