R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

234
Default
The broadcast suppression ratio for a VPLS instance is 5.
Views
VSI view
Default command level
2: System level
Parameters
vpn-speed: Specifies the upper speed limit of the VPLS instance in kbps, in the range of 64 to 4194303.
The system automatically calculates a speed that is the greatest multiple of 64 kbps between 64 and the
specified value.
Usage guidelines
This command, together with the broadcast-restrain command, defines a threshold that is used in
suppressing the broadcast traffic of the VPLS instance. When the speed of the broadcast traffic exceeds
the product of the speed limit and the broadcast suppression ratio, the extra broadcast traffic will be
dropped.
Examples
# Set the broadcast suppression ratio for VPLS instance aaa to 10.
<Sysname> system-view
[Sysname] vsi aaa
[Sysname-vsi-aaa] broadcast-restrain 10
description
Use description to configure a description for a VPLS instance.
Use undo description to remove the configuration.
Syntax
description text
undo description
Default
No description is configured for a VPLS instance.
Views
VSI view
Default command level
2: System level
Parameters
text: Specifies a description for a VPLS instance, a string of 1 to 80 characters.
Examples
# Set the description of VPLS instance aaa to Aaa_Technologies_Co._Ltd..
<Sysname> system-view
[Sysname] vsi aaa