R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

243
Field Descri
p
tion
In Interface Incoming interface—the interface bound to an L2VPN.
Link ID Link ID of an AC in the VPLS instance.
Access Mode Access mode at the AC side.
CE Type
Interface encapsulation type at the AC side: PortVlan or
Independent.
AC Encapsulation Encapsulation VLAN information at the AC side.
GR Count Number of times that GR occurs.
display mpls l2vpn fib pw vpls
Use display mpls l2vpn fib pw vpls to display the PW entry information for one or all VPLS instances.
Syntax
display mpls l2vpn fib pw vpls [ vsi vsi-name [ link link-id ] ] [ slot slot-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vsi vsi-name: Specifies the VPLS instance name, a case-insensitive string of 1 to 31 characters. Hyphens
(-) are not allowed. The specified VPLS instance must have existed.
link link-id: Specifies a PW in the VPLS instance by its link ID. The specified PW must have existed.
verbose: Displays the detailed information.
slot slot-number: Displays the PW entries on a card. The slot-number argument specifies the number of
the slot that holds the card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display PW entry information for all VPLS instance.