R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

17
Field Descri
p
tion
Transport Address
LDP transport address. The device uses this address to establish
a TCP connection with an LDP peer.
Entity Status Entity status, Active or Inactive.
Hello Message Sent/Rcvd Counts of hello messages sent/received on the interface.
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs established by LDP.
Syntax
display mpls ldp lsp [ all | [ vpn-instance vpn-instance-name ] [ destination-address mask-length ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all LSPs established by LDP.
vpn-instance vpn-instance-name: Displays the LSP information for the specified VPN. The
vpn-instance-name argument is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31
characters.
dest-addr mask-length: Displays the LSP information for a FEC. The dest-addr argument is the FEC
destination address. mask-length is the mask length of the destination address, in the range of 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameter, the command displays information about all LSPs established by
LDP.
Examples
# Display information about all LSPs established by LDP.
<Sysname> display mpls ldp lsp
LDP LSP Information