R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

34
<Sysname> display mpls route-state
Flags:
M: Master B: Backup I: Idle R: Ready S: Setting up N: No route U: Unknown
DestAddress/Mask Next-Hop Out-Interface Flag Lsp-Count Vrf-Index
----------------------------------------------------------------------------------
1.1.1.9/32 23.23.223.2 Vlan223 MR 1 0
2.2.2.9/32 23.23.223.2 Vlan223 MR 1 0
3.3.3.9/32 127.0.0.1 InLoop0 MR 1 0
101.3.3.3/32 127.0.0.1 InLoop0 MR 1 0
Table 21 Command output
Field Descri
p
tion
DestAddress/Mask Destination and mask of the route.
Next-Hop Next hop of the route.
Out-Interface Egress interface of the route.
Flag
Route flag:
• M—Primary route.
• B—Backup route.
• I—Idle route.
• R—LSP for the route has been established.
• S—LSP for the route is being established.
• N—No route.
• U—Unknown state.
Lsp-Count Number of LSPs established for the route.
Vrf-Index VPN instance ID.
display mpls static-lsp
Use display mpls static-lsp to display static LSP information.
Syntax
display mpls static-lsp [ lsp-name lsp-name ] [ { exclude | include } dest-addr mask-length ] [ verbose ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
lsp-name lsp-name: Displays information about the specified LSP. The LSP name is a string of 1 to 15
characters.
exclude: Displays information about the LSPs other than the one for the given FEC.
include: Displays information about the LSP for the given FEC.