R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

69
reset mpls statistics tunnel
Use reset mpls statistics tunnel to clear statistics for one or all public network tunnels.
Syntax
reset mpls statistics tunnel [ token token ]
Views
User view
Default command level
1: Monitor level
Parameters
token token: Specifies an LSP token to clear statistics of the public network tunnel with the specified LSP
token. The value range for the token is 0 to 4294967295.
Examples
# Clear statistics for the public network tunnel with the LSP token of 2.
<Sysname> reset mpls statistics tunnel token 2
Related commands
display mpls statistics tunnel
static-lsp egress
Use static-lsp egress to configure a static LSP taking the current LSR as the egress.
Use undo static-lsp egress to remove a static LSP taking the current LSR as the egress.
Syntax
static-lsp egress lsp-name incoming-interface interface-type interface-number in-label in-label
undo static-lsp egress lsp-name
Views
System view
Default command level
2: System level
Parameters
lsp-name: Specifies an LSP name, a string of 1 to 15 characters.
incoming-interface interface-type interface-number: Specifies an incoming interface by its type and
number.
in-label in-label: Specifies an incoming label, which can be 0, 3, or a value in the range of 16 to 1023.
Examples
# Configure a static LSP taking the current LSR as the egress, and specify the LSP's name as bj-sh,
incoming interface as Serial 2/1/0, and incoming label as 233.
<Sysname> system-view
[Sysname] static-lsp egress bj-sh incoming-interface serial 2/1/0 in-label 233