R3303-HP 6600/HSR6600 Routers MPLS Configuration Guide

125
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/1/- Tunnel4
[RouterE] display mpls te tunnel
LSP-Id Destination In/Out-If Name
2.2.2.2:1 3.3.3.3 POS5/1/0/POS5/1 Tunnel5
Execute the display mpls lsp verbose command on Router B. You can see that the bypass tunnel is
bound with the protected interface GigabitEthernet 2/1/2 and is unused.
[RouterB] display mpls lsp verbose
-------------------------------------------------------------------
LSP Information: RSVP LSP
-------------------------------------------------------------------
No : 1
IngressLsrID : 1.1.1.1
LocalLspID : 1
Tunnel-Interface : Tunnel4
Fec : 4.4.4.4/32
Nexthop : 3.1.1.2
In-Label : 1024
Out-Label : 1024
In-Interface : GigabitEthernet2/1/1
Out-Interface : GigabitEthernet2/1/2
LspIndex : 4097
Tunnel ID : 0x22001
LsrType : Transit
Bypass In Use : Not Used
BypassTunnel : Tunnel Index[Tunnel5], InnerLabel[1024]
Mpls-Mtu : 1500
No : 2
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel5
Fec : 3.3.3.3/32
Nexthop : 3.2.1.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : POS5/1/0
LspIndex : 4098
Tunnel ID : 0x22002
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
Mpls-Mtu : 1500
6. Verify the FRR function:
# Shut down the protected outgoing interface on PLR.
[RouterB] interface giabitethernet 2/1/2
[RouterB-GigabitEthernet2/1/2] shutdown