R3303-HP 6600/HSR6600 Routers MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-XG TAA-compliant Router

231

232

233

234

235

236

237

238

239

240

228

[Sysname] sysname PE1

[PE1] interface loopback 0

[PE1-LoopBack0] ip address 1.1.1.9 32

[PE1-LoopBack0] quit

[PE1] mpls lsr-id 1.1.1.9

[PE1] mpls

[PE1-mpls] quit

[PE1] mpls ldp

[PE1-mpls-ldp] quit

# Configure an IP address for interface GigabitEthernet 2/1/1.

[PE1] interface gigabitethernet 2/1/1

[PE1-GigabitEthernet2/1/1] ip address 10.10.10.10 24

# Configure basic MPLS on GigabitEthernet 2/1/1.

[PE1-GigabitEthernet2/1/1] mpls

[PE1-GigabitEthernet2/1/1] mpls ldp

[PE1-GigabitEthernet2/1/1] quit

# Configure the remote LDP peer.

[PE1] mpls ldp remote-peer 1

[PE1-mpls-remote-1] remote-ip 2.2.2.9

[PE1-mpls-remote-1] quit

# Configure MP-BGP for VPLS.

[PE1] bgp 100

[PE1-bgp] peer 2.2.2.9 as-number 100

[PE1-bgp] peer 2.2.2.9 connection-interface loopback 0

[PE1-bgp] vpls-family

[PE1-bgp-af-vpls] peer 2.2.2.9 enable

[PE1-bgp-af-vpls] quit

[PE1-bgp] quit

# Enable L2VPN and MPLS L2VPN.

[PE1] l2vpn

[PE1-l2vpn] mpls l2vpn

[PE1-l2vpn] quit

# Create VPLS instance aaa that uses LDP signaling.

[PE1] vsi aaa static

[PE1-vsi-aaa] pwsignal ldp

[PE1-vsi-aaa-ldp] vsi-id 500

[PE1-vsi-aaa-ldp] peer 2.2.2.9

[PE1-vsi-aaa-ldp] quit

[PE1-vsi-aaa] quit

# Create VPLS instance bbb that uses BGP signaling.

[PE1] vsi bbb auto

[PE1-vsi-bbb] pwsignal bgp

[PE1-vsi-bbb-bgp] route-distinguisher 100:1

[PE1-vsi-bbb-bgp] vpn-target 111:1

[PE1-vsi-bbb-bgp] site 1 range 10

[PE1-vsi-bbb-bgp] quit

[PE1-vsi-bbb] quit