R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

254
Host-monitor commands
display host-monitor
Use display host-monitor to display flow entries in the host-monitor table.
Syntax
6602:
display host-monitor [ invalid ] [ verbose ] [ destination ip-address | interface interface-type
interface-number | source ip-address ] * [ | { begin | exclude | include } regular-expression ]
HSR6600/6604/6608/6616:
display host-monitor [ invalid ] [ verbose ] [ destination ip-address | interface interface-type
interface-number | source ip-address ] * [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: M o n i t o r l ev e l
Parameters
invalid: Displays illegitimate flow entries. If this keyword is not specified, legitimate flow entries are
displayed.
verbose: Displays detailed information about flow entries. If this keyword is not specified, brief
information about flow entries is displayed.
destination ip-address: Specifies the destination IP address. The ip-address argument is an IPv4 address
in dotted decimal notation.
interface interface-type interface-number: Specifies an interface by its type and number.
source ip-address: Specifies the source IP address. The ip-address argument is an IPv4 address in dotted
decimal notation.
slot slot-number: Displays the flow entries for a card. The slot-number argument specifies a card by its slot
number. If no slot is specified, the flow entries for each card are displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# (6602) Display brief information about all legitimate flow entries in the host-monitor table.
<Sysname> display host-monitor