R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

IPC configuration commands

The display commands in this document display only information about active nodes.

For the 6602 and HSR6602 routers, "local node" refers to the current device.

For the 6604, 6608, and 6616, "local node" refers to the current device or the active MPU.

display ipc channel

Use display ipc channel to display channel information for a node.

Syntax

display ipc channel { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: M o n i t o r l ev e l

Parameters

node node-id: Displays channel information for the node specified by the node-id argument. The

following matrix shows the value ranges for the node-id argument:

6602 HSR6602 6604/6608/6616

0 to 1

0 to 2

• 0 to 3 for 6604

• 0 to 5 for 6608

• 0 to 9 for 6616

self-node: Displays channel information for the local node.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display channel information for node 0.

<Sysname> display ipc channel node 0

ChannelID Description

-----------------------------------------------

19 RPC channel

72 Portal Backup Channel

79 DHCP