R3303-HP 6600/HSR6600 Routers Security Command Reference

79
The setting configured by the nas-ip command in RADIUS scheme view is only for the RADIUS scheme,
whereas that configured by the radius nas-ip command in system view is for all RADIUS schemes. The
setting in RADIUS scheme view takes precedence.
Examples
# Set the IP address for the device to use as the source address of the RADIUS packets to 129.10.10.1.
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1
Related commands
nas-ip
radius scheme
Use radius scheme to create a RADIUS scheme and enter RADIUS scheme view.
Use undo radius scheme to delete a RADIUS scheme.
Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
Default
No RADIUS scheme is defined.
Views
System view
Default command level
3: Manage level
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
A RADIUS scheme referenced by ISP domains cannot be removed.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
Related commands
display radius scheme
radius trap
Use radius trap to enable the trap function for RADIUS.
Use undo radius trap to disable the trap function for RADIUS.