R3303-HP 6600/HSR6600 Routers Security Command Reference

82
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
Examples
# Clear the stop-accounting requests buffered for user user0001@test.
<Sysname> reset stop-accounting-buffer user-name user0001@test
# Clear the stop-accounting requests buffered in the time range from 0:0:0 to 23:59:59 on August 31,
2006.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-08/31/2006 23:59:59-08/31/2006
Related commands
• stop-accounting-buffer enable
• display stop-accounting-buffer
retry
Use retry to set the maximum number of attempts for transmitting a RADIUS packet to a single RADIUS
server.
Use undo retry to restore the default.
Syntax
retry retry-times
undo retry
Default
The maximum number of RADIUS packet transmission attempts is 3.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
retry-times: Maximum number of RADIUS packet transmission attempts, ranging from 1 to 20.
Usage guidelines
Because RADIUS uses UDP packets to transmit data, the communication is not reliable. If the device does
not receive a response to its request from the RADIUS server within the response timeout period, it
retransmits the RADIUS request. If the number of transmission attempts exceeds the limit but the device
still receives no response from the RADIUS server, the device considers the request a failure.
The maximum number of packet transmission attempts multiplied by the RADIUS server response timeout
period cannot be greater than 75.
Examples
# Set the maximum number of RADIUS request transmission attempts to 5 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1