R3303-HP 6600/HSR6600 Routers Security Configuration Guide

146
d. Click OK.
Figure 52 Portal server configuration
2. Configure the IP address group:
a. Select User Access Manager > Portal Service > IP Group from the navigation tree to enter the
portal IP address group configuration page.
b. Click Add to enter the page shown in Figure 53.
c. Enter the IP group name.
d. Enter the start IP address and end IP add
ress of the IP group.
Make sure that the host IP address is in the IP group.
e. Select a service group.
By default, the group Ungrouped is used.
f. Select the IP group type Normal.
g. Click OK.
Figure 53 Adding an IP address group
3. Add a portal device: