R3303-HP 6600/HSR6600 Routers Security Configuration Guide

407
Table 38 Configuration items
Item Descri
p
tion
Server Type
Select the type of the RADIUS server to be configured. Possible values include
primary authentication server, primary accounting server, secondary
authentication server, and secondary accounting server.
IP Address
Specify the IPv4 or IPv6 address of the RADIUS server.
The IP addresses of the primary and secondary servers for a scheme must be
different. Otherwise, the configuration fails.
RADIUS server addresses in the same scheme must use the same IP version.
Port Specify the UDP port of the RADIUS server.
Key
Confirm Key
Specify the shared key for communication with the RADIUS server.
If no shared key is specified, the shared key specified in the common configuration
part is used.
VPN
Specify the VPN to which the RADIUS server belongs.
If no VPN is specified, the VPN specified in the common configuration part is used.
5. Configure RADIUS authentication:
a. Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b. Click the RADIUS Authentication tab to enter the RADIUS authentication configuration page.
Figure 179 RADIUS authentication
c. Configure the RADIUS authentication settings as described in Table 42.
d. Click Apply.
Table 39 Configuration items
Item Descri
p
tion
Enable RADIUS
authentication
Select this item to enable RADIUS authentication.
Authentication Mode
Select an authentication mode for RADIUS authentication. Options include Password
and Password+Certificate.
Enable RADIUS
accounting
Select this item to enable RADIUS accounting.
Upload virtual
address
With this item selected, the system uploads the IP address of the client's virtual network
adapter to the RADIUS server after RADIUS accounting succeeds.