HP 6600/HSR6600/HSR6800 Router Series Interface Module Guide

12
LEDs
Table 14 LED description
LED Status Descri
p
tion
LINK/ACT
(Green)
Off No link is present.
On A 155.52 Mbps link is present.
Flashing The SFP port is receiving or sending data at 155.52 Mbps.
LP/AL
(Yellow)
Off No loopback or alarm exists.
On The interface is in loopback state.
Flashing There is at least one alarm.
Interface specifications
Table 15 Interface specifications
Item S
p
ecification
Connector type SFP/LC
Number of interfaces
• HIM-CLS1P: 1
• HIM-CLS2P: 2
Interface standards SONET OC-3/SDH STM-1
Interface speed 155.52 Mbps
Optical
transmit
power
Type Short haul Medium haul Long haul Ultra-long haul
Min. –19.0 dBm –15.0 dBm –5.0 dBm –5.0 dBm
Max. –14.0 dBm –8.0 dBm 0 dBm 0 dBm
Receiving sensitivity –30.0 dBm –28.0 dBm –34.0 dBm –34.0 dBm
Overload optical power –14.0 dBm –7.0 dBm –9.0 dBm –10.0 dBm
Central wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Max. transmission
distance
2 km (1.24 miles)
15 km (9.32 miles)
40 km (24.86
miles)
80 km (49.71
miles)
Fiber type
62.5/125 μm
multi-mode
9/125 μm
single-mode
9/125 μm
single-mode
9/125 μm
single-mode
Interface cable
The HIM-CLS1P/HIM-CLS2P must work with an SFP transceiver module and an optical fiber with LC-type
connectors. For the appearance and connection of a HIM-CLS1P/HIM-CLS2P interface cable, see
"Connecting an optical interface cable."
HIM-MSP2P/HIM-MSP4P
The HIM-MSP2P/HIM-MSP4P is a high-speed OC-3/STM-1 (155 Mbps) and OC-12/STM-4 (622 Mbps)
non-channelized POS interface module. The HIM-MSP2P/HIM-MSP4P supports PPP, Frame Relay, and
HDLC at the data link layer and IP at the network layer.
When using the HIM-MSP2P/HIM-MSP4P, follow these guidelines: