HSR6800 Router Series Interface Module Guide

Figure 12 Front panel

(1) Captive screw (2) Ejector lever

(3) SFP port carrier si

nal LED (LINK/ACT)

(4)

SFP port loopback/alarm LED (LP/AL)

(5) SFP port 3 (155 Mbps) or SFP port 1 (622

Mbps)

(6)

SFP port 2 (155 Mbps) or SFP port 0 (622 Mbps)

(7) SFP port 1 (155 Mbps) (8) SFP port 0 (155 Mbps)

LEDs

Table 16 LED description

LED Status Descri

tion

LINK/ACT

(Green)

Off No link is present.

On A 155.52/622.08 Mbps link is present.

Flashing The SFP port is receiving or sending data at 155.52/622.08 Mbps.

LP/AL

(Yellow)

Off No loopback or alarm exists.

On The port is in loopback state.

Flashing There is at least one alarm.

Interface specifications

Table 17 Interface specifications

Item S

ecification

Connector type SFP/LC

Number of interfaces

• HIM-MSP2P: 2 OC-3 interfaces or 1 OC-12 interface

• HIM-MSP4P: 4 OC-3 interfaces or 2 OC-12 interfaces

Interface standards

• SONET STS-3/STS-12

• SDH STM-1/STM-4

Interface speed 155.52/622.08 Mbps

OC-3 interface (155.52 Mb

Optical

transit

power

Type Short haul Medium haul Long haul Ultra-long haul

Min. –19.0 dBm –15.0 dBm –5.0 dBm –5.0 dBm

Max. –14.0 dBm –8.0 dBm 0 dBm 0 dBm

45678