HP 6600/HSR6600/HSR6800 Router Series Interface Module Guide
18
Figure 15 Front panel of HIM-AL2P
(1) Captive screw (2) Ejector lever
(3) SFP port (4)
SFP port carrier si
g
nal LED (LINK/ACT)
(5) SFP port loopback/alarm LED (LP/AL)
LEDs
Table 20 LED description
LED Status Descri
p
tion
LINK/ACT
(Green)
Off No link is present.
On A 155.52 Mbps link is present.
Flashing The SFP port is receiving or sending data at 155.52 Mbps.
LP/AL
(Yellow)
Off No loopback or alarm exists.
On The port is in loopback state.
Flashing There is at least one alarm.
Interface specifications
Table 21 Interface specifications
Item S
p
ecification
Connector type SFP/LC
Number of interfaces
• HIM-AL1P: 1
• HIM-AL2P: 2
Interface standards SONET OC-3C/SDH STM-1
Interface speed 155.52 Mbps
Optical
transit
power
Type Short haul Medium haul Long haul Ultra-long haul
Min. –19.0 dBm –15.0 dBm –5.0 dBm –5.0 dBm
Max. –14.0 dBm –8.0 dBm 0 dBm 0 dBm
Receiving sensitivity –30.0 dBm –28.0 dBm –34.0 dBm –34.0 dBm
Overload optical power –14.0 dBm 7.0 dBm –9.0 dBm –10.0 dBm