HSR6800 Router Series Interface Module Guide

Item S

ecification

Central wavelength 1310 nm 1310 nm 1310 nm 1550 nm

Max. transmission

distance

2 km (1.24 miles)

15 km (9.32 miles)

40 km (24.86

miles)

80 km (49.71

miles)

Fiber type

62.5/125 μm

multi-mode

9/125 μm

single-mode

9/125 μm

single-mode

9/125 μm

single-mode

Interface cable

The HIM-AL1P/HIM-AL2P must work with an SFP transceiver module and an optical fiber with LC-type

connectors. For the appearance and connection of a HIM-AL1P/HIM-AL2P interface cable, see

"Connecting an optical interface cable."

HIM-RS2P

The HIM-RS2P is a 2.5 Gbps OC-48/STM-16 Resilient Packet Ring (RPR) interface module. It provides two

SFP RPR ports and two SFP Mate ports. Each RPR port is provided with six status LEDs, which show the

running status and fault detection status of RPR and optical interface at the physical layer.

The HIM-RS2P supports:

• Two frame formats: SDH STM-16 and SONET OC-48C.

• Line clock mode and internal clock mode.

• Loopback tests such as data loopback test, external SONET/SDH loopback test, and external link

loopback test.

• Hot swapping.

Front panel

Figure 16 Front panel

(1) Captive screw

(2)

Ejector lever

(3) PASSTHRU LED of the MAC RPR node (4) WRAP LED of MAC RPR node

(5) MAC MATE interface LED (6)

STEER LED of the MAC RPR node

(7) External SFP port of the MAC RPR node

(8) MAC external SFP port carrier si

nal LED (LINK/ACT)

(9) MAC external SFP port loopback/alarm LED (LP/AL)

(10) Mate interface of the MAC RPR node