HSR6800 Router Series Interface Module Guide

Figure 21 Front panel of MIM-8T1-F

The front panel of the MIM-8T1-F is similar to that of the MIM-8T1.

Inteface specifications

Table 29 Interface specifications

Item S

ecification

Connector type RJ-45

Number of interfaces 1

Interface standard

• G.703/T1 102

• G.704

• AT&T TR 54016

• AT&T TR 62411

• ANSI T1.403

Interface speed 1.544 Mbps

Interface cable type 8T1 splitter cable

Working modes

• CT1 (supported by the MIM-8T1)

• FT1 (supported by the MIM-8T1-F)

Services supported

• Backup

• Terminal access service

LEDs

Table 30 LED description

LED Status Descri

tion

LINK/ACT

(Green)

Off No carrier signals are being received.

On Carrier signals are being received.

Flashing Data is being transmitted or received.

LP/AL

(Yellow)

Off No loopback or alarms occur.

On The interface is in loopback state.

Flashing At least one alarm of the type of AIS, LFA, or RAI occurs.

Interface cable

The MIM-8T1 or MIM-8T1-F provides eight T1 interfaces and uses an 8T1 splitter cable. At one end of this

cable is a DB-68 connector used to connect to the device, and at the other end are eight RJ-45 connectors

used to connect to the peer devices.