HSR6800 Router Series Interface Module Guide

Item S

ecification (in s

nchronous mode)

Cable type

• V.24 (RS-232) DTE cable

• V.24 (RS-232) DCE cable

• V.35 DTE cable

• V.35 DCE cable

• X.21 DTE cable

• X.21 DCE cable

• RS-449 DTE cable

• RS-449 DCE cable

• RS-530 DTE cable

• RS-530 DCE cable

Services supported DDN leased line

Interface cable

Each interface on the MIM-2SAE/MIM-4SAE/MIM-8SAE is a 28-pin connector, and the interface cables

for the MIM-2SAE/MIM-4SAE/MIM-8SAE are synchronous/asynchronous serial interface cables with

DB-28 connectors.

Before connecting cables to the interfaces on the MIM-2SAE/MIM-4SAE/MIM-8SAE, examine the line

properties. The following are cable options depending on different line properties:

• V.24 (RS-232) DTE cable—DB-25 (male) connector at the network end

• V.24 (RS-232) DCE cable—DB-25 (female) connector at the network end

• V.35 DTE cable—34-pin (male) connector at the network end

• V.35 DCE cable—34-pin (female) connector at the network end

• X.21 DTE cable—DB-15 (male) connector at the network end

• X.21 DCE cable—DB-15 (female) connector at the network end

• RS-449 DTE cable— DB-37 (male) connector at the network end

• RS-449 DCE cable—DB-37 (female) connector at the network end

• RS-530 DTE cable—DB-25 (male) connector at the network end

• RS-530 DCE cable—DB-25 (female) connector at the network end

NOTE:

• The above cables are all optional for the MIM-2SAE/MIM-4SAE/MIM-8SAE to be separately ordered

if needed.

• All the above cables have a DB-28 connector at one end for connection with the router, and different

types of connectors at the other end depending on the interface on the network side.

• For the appearance and connection of a MIM-2SAE/MIM-4SAE/MIM-8SAE interface cable, see

"Connecting a serial interface cable."

SAPs

SAPs are not carried on the flexible interface platform (FIP) but inserted in the service module slots of the

router.