HSR6800 Router Series Interface Module Guide

LED Status Descri

tion

Slow flashing (1 Hz)

The SAP-48GBE is operating correctly.

Fast flashing (8 Hz)

Application program is being loaded (in this case, never power off

the device or hot-swap the SAP-48GBE; otherwise, the SAP-48GBE

might be damaged).

GE 0 to GE 47

(Yellow/green)

Off No link is present or the cable is faulty.

Steady green A 1000 Mbps link is present

Flashing green Data is being received or transmitted at 1000 Mbps.

Steady yellow A 10/100 Mbps link is present.

Flashing yellow Data is being received or transmitted at 10/100 Mbps.

Interface specifications

Table 42 Interface specifications

Item S

ecification

Connector type RJ-45

Number of interfaces 48

Interface standards 802.3, 802.3u, and 802.3ab

Interface type Auto MDI/MDI-X

Cable type Straight-through/crossover Ethernet cable

Transmission distance 100 m (328.08 ft)

Supported frame format

• Ethernet_II

• Ethernet_SNAP

Interface speed and duplex

mode

10 Mbps Full/half duplex, auto-negotiation

100 Mbps Full/half duplex, auto-negotiation

1000 Mbps Full duplex

Interface cable

The SAP-48GBE uses a category-5 straight-through or crossover Ethernet cable when operating at

10/100 Mbps, and uses a category-6 cable (recommended) when operating at 1000 Mbps. For the

appearance and connection of a SAP-48GBE interface cable, see "Connecting an Ethernet interface

ble."

SAP-24GBP

The SAP-24GBP is a 24-port 100/1000 Mbps auto-sensing optical Ethernet service module. It provides

24 SFP ports, all of which feature Layer 3 routing and high-performance Layer 2 switching. Each interface

uses a bi-color LED indicating the running status of the interface. In addition, the SAP-24GBP uses a run

LED (RUN) to show the running status of the service module.