HP 6600/HSR6600/HSR6800 Router Series Interface Module Guide

37
Front panels
Figure 29 Front panel
(1) SFP port (2) Captive screw
(3) System status LED (RUN) (4) Ejector lever
(5) SFP port status LED
Specifications
Table 43 Specifications
Item S
p
ecification
Processor Multi-core MIPS processor with ASIC chips
Flash 4 MB
Memory type and size
• DDR2 SDRAM
• 2 GB (default, two 1 GB memory modules)
CAUTION:
Use two DDR2 SDRAM modules of the same size at a time.
NVRAM 128 KB
Max. power consumption 125 W
LEDs
Table 44 LED description
LED Status Descri
p
tion
RUN
(Green)
Off No power input is available or the SAP-24GBP has failed.
Slow flashing (1 Hz) The SAP-24GBP is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded (in this case, never power off
the device or hot-swap the SAP-24GBP; otherwise, the SAP-24GBP
might be damaged).
SFP 0 to SFP 23
(Yellow/green)
Off No link is present or the cable is faulty.
Steady green A 1000 Mbps link is present
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.