HP 6600/HSR6600/HSR6800 Router Series Interface Module Guide

39
SAP-48GBP
The SAP-48GBP is a 48-port 100/1000 Mbps auto-sensing optical Ethernet service module. It provides
48 SFP ports, all of which feature Layer 3 routing and high-performance Layer 2 switching. Each port
uses a bi-color LED indicating the running status of the port. In addition, the SAP-48GBP uses a run LED
(RUN) to show the running status of the module.
Front panel
Figure 30 Front panel
(1) SFP port (2) System status LED (RUN)
(3) SFP status LED (4) Ejector lever
(5) Captive screw
Specifications
Table 46 Specifications
Item S
p
ecification
Flash 4 MB
Memory type and size
• DDR2 SDRAM
• 2 GB (default, two 1 GB memory modules)
CAUTION:
Use two DDR2 SDRAM modules of the same size at a time.
NVRAM 128 KB
Max. power consumption 144 W
LEDs
Table 47 LED description
LED Status Descri
p
tion
RUN
(Green)
Off No power input is available or the SAP-48GBP has failed.
Slow flashing (1 Hz) The SAP-48GBP is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded (in this case, never power off
the device or hot-swap the SAP-48GBP; otherwise, the SAP-48GBP
might be damaged).