HP 6600/HSR6600/HSR6800 Router Series Interface Module Guide

40
LED Status Descri
p
tion
SFP 0 to SFP 47
(Yellow/green)
Off No link is present or the cable is faulty.
Steady green A 1000 Mbps link is present
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.
Interface specifications
Table 48 Interface specifications
Item S
p
ecification
Connector type SFP
Number of interfaces 48
Interface standards 802.3, 802.3u, and 802.3ab
Supported frame
format
• Ethernet_II
• Ethernet_SNAP
Optical
transmit
power
Type Short haul Medium haul Long haul Long haul Ultra-long haul
Min. –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Max. 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receiving sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125 μm
multi-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
Max. transmission
distance
0.55 km
(0.3418 miles)
10 km (6.21
miles)
40 km (24.86
miles)
40 km (24.86
miles)
70 km (43.50
miles)
Interface speed
• 1000 Mbps (recommended)
• Full duplex
The SAP-48GBP supports the following types of transceiver modules:
• 100 Mbps SFP transceiver modules
• 1000 Mbps SFP transceiver modules
• 100/1000 Mbps SFP transceiver modules
• 10/100/1000 Mbps SFP copper transceiver modules supporting fiber-to-copper conversion (The
SAP-48GBP supports 10/100/1000 Mbps auto-sensing if used together with a transceiver
module.)
The SAP-48GBP is optional to be separately ordered if needed.
Use transceiver modules provided by HP only. The device might be incompatible with other transceiver
modules and thus displays alarms automatically.