HSR6800 Router Series Interface Module Guide

Interface cable

• When working with SFP transceiver modules, the SAP-48GBP must use an optical fiber with LC-type

connectors.

• When working with transceiver modules supporting fiber-to-copper conversion, the SAP-48GBP

uses category-5 straight-through or crossover Ethernet cables when operating at 10/100 Mbps,

and uses category-6 cable (recommended) when operating at 1000 Mbps.

For the appearance and connection of a SAP-48GBP interface cable, see "Connecting an Ethernet

inter

face cable" or "Connecting an optical interface cable."

SAP-4EXP

The SAP-4EXP is a 4-port 10 Gbps Ethernet service module. It provides 4 SFP+ ports, all of which feature

Layer 3 routing and high-performance Layer 2 switching. Each port uses a bi-color LED indicating the

running status of the interface. In addition, the SAP-4EXP uses a run LED (RUN) to show the running status

of the module.

Front panel

Figure 31 Front panel

(1) SFP+ ports 0 to 3 (2) Status LED (RUN)

(3) SFP+ port LEDs

(4) Ejector lever

(5) Captive screw

Interface specifications

Table 49 Interface specifications

Item Remarks

Flash 8 MB

Memory type and size

DDR3 SDRAM

• 4 GB (default, two 2-GB memory modules)

• 4 GB (maximum, two 2-GB memory modules)

Use two DDR3 SDRAM modules with the same size at a time.

NVRAM 128 KB

Power consumption 109 W