HSR6800 Router Series Interface Module Guide

LEDs

Table 50 LED description

LED Status Descri

tion

RUN

(Green)

Off No power input is available or the SAP-4EXP has failed.

Slow flashing (1 Hz)

The SAP-4EXP is operating correctly.

Fast flashing (8 Hz)

Application program is being loaded or the SAP-4EXP is not

operating.

CAUTION:

To avoid hardware damage, do not power off the router, or insert

or remove the SAP-4EXP when the software image is being loaded.

SFP+ 0 to SFP+ 3

(Yellow/green)

Off No link is present.

Steady green A 10 Gbps link is present.

Flashing green Data is being received or transmitted at 10 Gbps.

Steady yellow The transceiver module failed to be detected.

Interface specifications

Table 51 10G Ethernet port specifications

Item Su

orted standard

Protocol standard 802.3ae

Connector type LC

Transceiver module SFP+

Physical layer type supported 10GBASE-R/W

Interface rate

• In LAN PHY mode: 10.3125 Gbps

• In WAN PHY mode: 9.95328 Gbps

Interface cable

The SAP-4EXP must use an optical fiber with LC-type connectors. For the appearance and connection of

a SAP-4EXP interface cable, see "Connecting an optical interface cable."