HP Comware 5 Debug Manual Vol 1

Table 133 Output from the debugging voice ss cw info command
Field
Description
The CW CCB is initialized in create CW CCB. The CW CCB was initialized successfully.
The CW CCB is deleted successfully. The CW CCB was deleted successfully.
No find original call leg in judge talking process. No call leg was found in talk path judgment.
The talk path number is [%d] in judge talking process. The number of talk paths in talk path judgment is xxx.
Both legs are active,in judge talking process.
Both of the two legs were in conversation in talk path
judgment.
Stop playing call waiting signal tone.
The FEATURE service tones were stopped from being
played.
Complete to control playing call waiting signal tone. The control over announcement play ended.
Send CMC_SERVICE[CW] message on CW idle
state.
A CMC_SERVICE[CW] message was sent in the idle
state.
Play sound on CW idle state when
PLAY_SOUND_INTERVAL timer is out.
The FEATURE service tones were played in the idle
state when the PLAY_SOUND_INTERVAL timer
expired.
Received CW_FAIL CMC message on CW pending
state.
A CW_FAIL message was received in the pending
state.
Received CW_NOTSUPPORT CMC message on CW
pending state.
A CW_NOTSUPPORT message was received in the
pending state.
Received CW_OK CMC message on CW pending
state.
A CW_OK message was received in the pending
state.
Play sound on CW pending state when received
service_ack.
A SERVICE_ACK message was received, and call
waiting tones were played.
Received CH_FAIL CMC message on CW MCH state.
A CH_FAIL message was received in the multi-call hold
state.
Received CH_OK CMC message on CW MCH state.
A CH_OK message was received in the multi-call hold
state.
Received CH_UNSUPPORT CMC message on CW
MCH state.
A CH_UNSUPPORT message was received in the
multi-call hold state.
Ta b l e 134 describes output fields and messages for the debugging voice ss cw timer command.
Table 134 Output from the debugging voice ss cw timer command
Field
Description
Timer created, TimerId : %s, Timer length : %d.
A timer was created. The timer ID is xxx, and the timer
length is xxx milliseconds.
Timer deleted, TimerId : %s. A timer was deleted. The timer ID is xxx.
Timer timeout, TimerId : %s. A timer expired. The timer ID is xxx.
Examples
# Enable all types of debugging for call waiting on Router A. Output similar to the following example is
generated when the following conditions exist:
258