HP Comware 5 Debug Manual Vol 1

Field
Description
AuthFlag
Authentication mode of the newly added SNMPv3 group user:
• 1—MD5.
• 2—SHA.
PacketLen Data length.
Examples
In the following examples, Device A is the management device in a cluster and it is communicating with
a managed member device on the whitelist.
# Enable SNMP configuration synchronization event debugging on both Device A and its managed
device. When a command is issued to create a read-community for the cluster, output similar to the
following example is generated if the configuration is not successful:
<DeviceA> debugging cluster ext event
<DeviceA> system-view
[DeviceA] cluster
[DeviceA-cluster] cluster-snmp-agent community read read
*0.27122800 DeviceA CLST/7/Debug_Cluster_Ext_Info:
Cluster Extension Information:
:
Error: packet length is error.
// The management device received an illegal packet.
*0.27122800 DeviceA CLST/7/Debug_Cluster_Ext_Info:
Cluster Extension Information:
:
Failed to config command on local device.
// Configuration failed because SNMP configuration on the management device is full or for other
reasons.
*0.27122800 DeviceA CLST/7/Debug_Cluster_Ext_Info:
Cluster Extension Information:
:
WEB: Failed to send packet.
// Cluster management failed to send the packet because of interface error.
# Enable SNMP configuration synchronization packet debugging on Device A. When a read-community
is created for the cluster, output similar to the following example is generated:
<DeviceA> debugging cluster ext packet
<DeviceA> system-view
[DeviceA] cluster
[DeviceA-cluster] cluster-snmp-agent community read read
*0.5614402 DeviceA CLST/8/Debug_Ext_Pkt_Send:
Send Extension Pkt:
MainCmd : 0
SrcMAC :00e0-fc00-3000
316