HP Comware 5 Debug Manual Vol 2

Table 79 Output from the debugging bundle error command
Field
Description
Failed to execute the operation:
operation on bundle bundle-id.
One of the following operations failed on the link bundle specified
by bundle-id:
• create—Creating the link bundle.
• modify—Modifying the selected member interfaces in the link
bundle.
• delete—Deleting the link bundle.
Table 8 describes the output fields and messages for the debugging bundle event command.
Table 80 Output from the debugging bundle event command
Field
Description
Executing the operation: operation on
bundle bundle-id.
One of the following operations is being performed on the link
bundle specified by bundle-id:
• create—Creating the link bundle.
• modify—Modifying the selected member interfaces in the link
bundle.
• delete—Deleting the link bundle.
The configuration of bundle bundle-id
has been changed.
The configuration of bundle bundle-id has been changed, which
may include:
• min-active links—The number of selected member interfaces
required to bring up the link bundle.
• max-active links—The limit on the number of selected member
interfaces in the link bundle.
• min-active bandwidth—The minimum amount of bandwidth
required to bring up the link bundle.
The member interface interface-name in
bundle bundle-id is blocked
The member interface interface-name in bundle bundle-id is blocked.
It will not be unblocked until it transits to the selected state.
Table 9 describes the output fields and messages for the debugging bundle packet command.
Table 81 Output from the debugging bundle packet command
Field
Description
output packet length: length, sending
interface: interface-name
The length of the output packet is length, and the name of the
member interface that sends the packet is interface-name. This field is
followed by details about the output packet.
Examples
# Enable error debugging for all HDLC link bundle interfaces. Output similar to the following example is
crated when you fail to create HDLC link bundle interface 1 due to insufficient memory of the device.
<Sysname> debugging bundle error hdlc-bundle
*Aug 26 15:01:41:640 2008 Sysname BNDL/7/Error:
Failed to create bundle 1 due to insufficient memory.
# Enable event debugging for all HDLC link bundle interfaces. Output similar to the following example
is crated when you assign POS interface POS 5/1 to HDLC link bundle 1.
<Sysname> debugging bundle event hdlc-bundle
*Aug 26 15:49:56:359 2008 Sysname BNDL/7/Event:Slot=1;
99