HP Comware 5 Debug Manual Vol 2

Table 85 Output from the debugging igmp report command
Field
Description
Ignoring This IGMP report was ignored.
IS_IN/IS_EX/TO_IN/TO_EX/ALLOW/BLOCK Record type of IGMPv3 membership report:
• IS_IN
• IS_EX
• TO_IN
• TO_EX
• ALLOW
• BLOCK
Group gadd Reported group address.
(sadd, gadd) (S, G) entry.
v1/v2/v3 Version of IGMP membership report.
Interfacename(ifadd) Interface that sent/received this message. The
interface address is displayed in the brackets.
Table 5 describes output fields and messages for the debugging igmp ssm-mapping command.
Table 86 Output from the debugging igmp ssm-mapping command
Field
Description
ssm-mapping notify IGMP reported SSM mapping multicast group
information to the upper-layer routing protocol.
Compatibility Group compatibility mode.
Lmqi timer Last-member query timer.
ssm-mapping policy table SSM mapping rule table.
Table 6 describes output fields and messages for the debugging igmp timer commands.
Table 87 Output from the debugging igmp timer command
Field
Description
Source sadd timeout The multicast source timer timed out.
Group gadd timeout The multicast group timer timed out.
Other querier present timeout The other querier present interval timer timed out.
Interfacename(ifadd) Interface that sent/received messages. The interface
address is displayed in the brackets.
Deleting v1 host timer IGMPv1 host present timer timed out.
Deleting v2 host timer IGMPv2 host timer timed out.
Setting v1 host timer IGMPv1 host present timer was configured.
Setting v2 host timer IGMPv2 host present timer was configured.
Examples
# Enable IGMP event debugging for the public network. When IGMP is enabled, output similar to the
following example is generated:
<Sysname> debugging igmp event
103