HP Comware 5 Debug Manual Vol 2

*0.70447221 85 IGMP/7/TIMER:(public net):Deleting lmqi timer for ssm-mapping group
232.1.1.1 on Vlan-interface20(1.1.1.1) (G016110)
// IGMP sent out queries f o r g r o u p 232.1.1.1. IGMP did not receive any report messages and deleted the
last-member query timer.
debugging igmp proxying
Use debugging igmp proxying to enable IGMP proxy debugging.
Use undo debugging igmp proxying to disable IGMP proxy debugging.
Syntax
debugging igmp [ all-instance | vpn-instance vpn-instance-name ] proxying { event | packet |
routing-table } advanced-acl-number
undo debugging igmp [ all-instance | vpn-instance vpn-instance-name ] proxying { event | packet |
routing-table }
Default
IGMP proxy debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, which must be a
case-sensitive string of 1 to 31 characters and must not contain any spaces.
event: Specifies IGMP proxy event debugging.
packet: Specifies IGMP proxy packet debugging.
routing table: Specifies IGMP proxy routing table debugging.
advanced-acl-number: Specifies an advanced ACL by its number, in the range of 3000 to 3999.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command enables IGMP proxy debugging for
the public network.
Table 7 describes output fields and messages for the debugging igmp proxying event command.
Table 88 Output from the debugging igmp proxying event command
Field
Description
enqueued The multicast group was enqueued.
dequeued The multicast group was dequeued.
proxy_calq IGMP proxy CALQ queue.
proxy cache IGMP proxy cache.
proxy database Group membership database maintained by the
IGMP proxy device.
106