HP Comware 5 Debug Manual Vol 2

Default
IGMP snooping debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
abnormal: Specifies IGMP snooping exception debugging.
all: Specifies all types of IGMP snooping debugging.
driver: Specifies IGMP snooping interface driver debugging.
event: Specifies IGMP snooping event debugging.
group: Specifies IGMP snooping group debugging.
ipc { receive | send }: Specifies inbound/outbound IPC packet debugging.
packet: Specifies IGMP snooping packet debugging.
vlan vlan-id: Specifies the VLAN to which an Ethernet port belongs. The value range for the vlan-id
argument is 1 to 4094.
port interface-type interface-number: Specifies an Ethernet port.
timer: Specifies IGMP snooping timer debugging.
Usage guidelines
Table 2 describes output fields and messages for the debugging igmp-snooping driver command.
Table 92 Output from the debugging igmp-snooping driver command
Field
Description
Add/Delete multicast vlan OIF to/from driver A multicast VLAN outgoing interface was added to or
deleted from the driver.
Add/Delete Level2 IP entry to/from driver A Layer 2 IP entry was added to or deleted from the
driver.
Add/Delete Unit/Board for multicast vlan to/from
driver
A unit/board for the multicast VLAN was added to or
deleted from the driver.
Add/Delete Unit/Board for Level2 IP entry to/from
driver
A unit/board for the Layer 2 IP entry was added to or
removed from the driver.
Add/Delete Port for multicast vlan OIF to/from driver A port was added to or deleted from the multicast
VLAN outgoing interface list on the driver.
Add/Delete Port for Level2 IP entry to/from driver A port was added to or deleted from the Layer 2 IP
entry on the driver.
Add/Delete multicast vlan IP entry to/from driver A multicast VLAN IP entry was added to or deleted
from the driver.
Add/Delete Level2 MAC entry to/from driver A Layer 2 MAC entry was added to or deleted from
the driver.
mask boardmask The destination board mask of an entry was added to
or deleted from the driver.
111