HP Comware 5 Debug Manual Vol 2

Field
Description
destination address addr
Destination address of the message.
Table 7 describes output fields and messages for the debugging igmp-snooping timer command.
Table 97 Output from the debugging igmp-snooping timer command
Field
Description
Create/Set IGMP snooping created/set a timer.
host port aging timer/time
router port aging timer/time
aggregation host port aging timer/time
aggregation router port aging timer/time
querier timer/interval
query respond timer
IGMP snooping timers:
• Host port aging timer/time
• Router port aging timer/time
• Aggregation host port aging timer/time
• Aggregation router port aging timer/time
• Querier timer/interval
• Query respond timer
Examples
# Enable IGMP snooping interface driver debugging. When IGMP snooping is enabled on the device, ,
output similar to the following example is generated:
<Sysname> debugging igmp-snooping driver
*Nov 6 17:57:38:189 2006 Sysname MCS/7/dri debugging igmp-snooping driver ver:Delete
Level2 MAC entry from driver: vlan:2, Mac:01-00-5e-00-00-01. (G081582)
// A Layer 2 MAC entry was deleted from the driver in VLAN 2.
# Enable IGMP snooping event debugging. When IGMP snooping is enabled on the device and IGMP
snooping proxy is enabled in VLAN 2, output similar to the following example is generated:
<Sysname> debugging igmp-snooping event
*Nov 7 17:24:29:944 2006 Sysname MCS/7/event:Succeed to enable IGMP snooping globally.
(G083748)
// IGMP snooping was enabled globally.
*Nov 7 17:25:21:742 2006 Sysname MCS/7/event:Succeed to enable IGMP snooping proxying
on vlan 2. (G202459)
// IGMP snooping proxy was enabled in VLAN 2.
# Enable IGMP snooping group debugging. When IGMP snooping is enabled on the device, output
similar to the following example is generated:
<Sysname> debugging igmp-snooping group
*Nov 6 18:06:29:314 2006 Sysname MCS/7/groups:Create L2 IP Source entry for (S,G)(1.1.1.1,
225.0.0.1) on vlan 2. (G149634)
// IGMP snooping created a Layer 2 IP entry (1.1.1.1, 2 2 5 . 0 . 0 .1) i n V L A N 2.
# Enable inbound IPC packet debugging. When IGMP snooping is enabled on the device, output similar
to the following example is generated:
<Sysname> debugging igmp-snooping ipc receive
*Nov 7 18:08:36:586 2006 Sysname MCS/7/ipcrecv:Slot=1;Received an IPC packet and insert
it into queue. (G18955)
// IGMP snooping received an IPC packet and added it into the IPC queue.
113