Manualshelf

HP Comware 5 Debug Manual Vol 2

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
11121314151617181920
Views
User view
Default command level
1: Monitor level
Parameters
actorchurn: Specifies debugging for the actor-churn state machine.
mux: Specifies debugging for the mux state machine.
partnerchurn: Specifies debugging for the partner-churn state machine.
ptx: Specifies debugging for the PTX state machine.
rx: Specifies debugging for the RX state machine.
all: Specifies debugging for all state machines.
interface-list: Specifies an interface range in the form of interface-type interface-number [ to
interface-type interface-number ], where interface-type specifies the interface type and interface-number
specifies the interface number.
Usage guidelines
If no port is specified, this command takes effect on all ports running LACP.
Table 1 describes output fields and messages for the debugging link-aggregation lacp fsm command.
6