HP Comware 5 Debug Manual Vol 2

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis

121

122

123

124

125

126

127

128

129

130

Field

Description

DOWN/MDOWN

DOWN indicates the backup interface is down at the physical

layer and the physical link is not available.

MDOWN indicates the main interface is down at the data link

layer and cannot work correctly.

UPDELAY/MDOWNDELAY Starting up the UPDELAY or MDOWNDELAY timer.

up-timer/down-timer The UPDELAY or MDOWNDELAY timer timed out.

hypnotized/wakeuped Hypnotized state/waken up state.

Table 2 describes output fields and messages for the debugging standby track command.

Table 99 Output from the debugging standby track command

Field

Description

information node Information node of the Track object associated with interface backup.

interface node Information node of interface associated with a Track object.

Reference count

Reference count for the interface backup module to associate with the same

Track object.

track status Track status information saved in the interface backup.

Examples

# Enable debugging for the interface backup events. The output in this example was created when

Ethernet 0/1 is configured as the backup interface of Ethernet 0/0.

<Sysname> debugging standby event

*Jan 16 14:38:23:483 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/0: standby interface

*Jan 16 14:38:23:484 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/0: standby-state will

change from MDESERT

*Jan 16 14:38:23:484 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/0: standby-state turns

to MUP

*Jan 16 14:38:23:485 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state will

change from DESERT

*Jan 16 14:38:23:485 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state turns

to UPDELAY

%Jan 16 14:38:28:620 2007 Sysname IFNET/4/UPDOWN:

Line protocol on the interface Ethernet0/1 is DOWN

%Jan 16 14:38:28:620 2007 Sysname DRVMSG/1/DRVMSG: Ethernet0/1: change status to down

*Jan 16 14:38:28:621 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby interface

up-timer expires

*Jan 16 14:38:28:622 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state turns

to UP

*Jan 16 14:38:28:622 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: the interface is

hypnotized

*Jan 16 14:38:28:623 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state will

change from UP

*Jan 16 14:38:28:623 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state turns

to STANDBY

116