HP Comware 5 Debug Manual Vol 2

%Jan 16 15:35:33:484 2007 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Ethernet0/1 is DOWN
%Jan 16 15:35:33:484 2007 Sysname DRVMSG/1/DRVMSG: Ethernet0/1: change status to down
*Jan 16 15:35:33:485 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/0: main interface
up-timer expires
*Jan 16 15:35:33:486 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/0: standby-state turns
to MUP
*Jan 16 15:35:33:486 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: the interface is
hypnotized
*Jan 16 15:35:33:487 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state will
change from UP
*Jan 16 15:35:33:487 2007 Sysname STANDBY/7/DEBUGGING: Ethernet0/1: standby-state turns
to STANDBY
// The main interface Ethernet 0/0 started to work again, and the backup interface Ethernet 0/1
changed to the standby state.
# Configure interface Ethernet 0/1 to associate with a Track object and enable debugging for the Track
object.
<Sysname> debugging standby track
*May 26 15:17:30:504 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
A new information node on TRACK 1 is created; track is Not exist
*May 26 15:17:30:519 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
A new interface node on TRACK 1 is created; reference count is 1
// Interface Ethernet 0/1 was associated with Track 1 and interface backup created the corresponding
Track information node.
*May 26 15:18:59:20 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Track notify: create. Track Number is 1.
*May 26 15:18:59:20 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Track Status is Invalid.
// Track object associated with Interface Ethernet 0/1 was created and the state of the Track information
node saved in interface backup changed.
*May 26 15:19:59:302 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Interface Ethernet0/1/0 is to be standby.
// NQA probe was enabled. When the state of the corresponding Track object changed to positive, the
state of the current interface changed to standby.
*May 26 15:20:24:158 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Track notify: modify. Track Number is 3; track status is changed to Negative.
*May 26 15:20:24:158 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Interface Ethernet0/1/0 is to be undo standby.
// When the state of the Track object changed from positive to negative, the state of the current interface
changed to non-standby.
*May 26 15:22:35:236 2007 Sysname STANDBY/7/TRACK-DEBUGGING:
Reference count come to 0, information on TRACK 1 is to be deleted
// Associations with Track 1 on all interfaces were deleted, the reference count of the Track object
information node saved in interface backup turned to 0, and the node was deleted.
118