HP Comware 5 Debug Manual Vol 2

Table 2 Output from the debugging link-aggregation lacp fsm command
Field
Description
state1-->state2 State transition of a state machine. state1 indicates the state before transition. state2 indicates
the state after transition.
The possible states include:
• BEGIN—The state machine was created, but it was in inactive state.
• INITIALIZE—The RX state machine completed initialization.
• PORT_DISABLED—The RX state machine was
in port unselected and out of synchronization
state.
• EXPIRED—The RX state machine had expired. Transition to the EXPIRED state triggered the
RX timeout timer.
• DEFAULTED—The RX state machine was in the default state. The RX state machine used the
selection algorithm to re-calculate the state of the group.
• LACP_DISABLED—LACP was disabled on the peer port.. The port was set to the unselected
state, the remote port information was cleared, and the default information was recorded
for the remote port.
• CURRENT—The RX state machine was in ready state. The RX state machine recorded
information in received LACPDUs. The machine performed processing depending on
whether the remote end information had changed.
• NO_PERIODIC—Periodic LACPDU transmission was disabled for the PTX state machine.
• FAST_PERIODIC—Periodic LACPDU transmission was enabled at a fast transmission rate
for the PTX state machine. The transmission period was 1 second.
• SLOW_PERIODIC—Periodic LACPDU transmission was enabled at a slow transmission rate
for the PTX state machine. The transmission period was 30 seconds.
• PERIODIC_Tx—Periodic LACPDU transmission was enabled for the PTX state machine.
• DETACHED—LAGG blocked the port and sent LACPDUs.
• WAITING—The MUX state machine was in the waiting state.
• ATTACHED—LAGG blocked the port and sent LACPDUs.
• COLLECTING_DISTRIBUTING—LAGG unblocked the port and sent LACPDUs.
• NO_ACTOR_CHURN—The actor was in a non-churn state.
• ACTOR_CHURN—The actor was in the churn state.
• ACTOR_CHURN_MONITOR—The churn timer was started, and the information that the
actor was in a non-churn state was recorded.
• NO_PARTNER_CHURN—The partner was in a non-churn state.
• PARTNER_CHURN—The partner was in the churn state.
• PARTNER_CHURN_MONITOR—The churn timer was started, and the information that the
partner was in a non-churn state was recorded..
7