HP Comware 5 Debug Manual Vol 2

vfr_operation: dgrm incomplete offset:0, waiting...
// IP virtual fragment reassembly for the datagram does not finish because the fragment with the offset
0 is not received.
*May 10 17:54:21:328 2000 Sysname VFR/7/IPVFR_DEBUG_COMMON:
vfr_rcv: fragment, target_ip_addr: 10.1.1.1, sender_ip_addr: 10.1.1.2, id: 54, offset:
1480, len: 548.
// IP virtual fragment reassembly received a fragment.
*May 10 17:54:22:88 2000 Sysname VFR/7/IPVFR_DEBUG_COMMON:
vfr_operation: dgrm complete.
// VFR operation: IP virtual fragment reassembly for the datagram finished.
debugging tcp event
Use debugging tcp event to enable TCP event debugging.
Use undo debugging tcp event to disable TCP event debugging.
Syntax
Centralized devices:
debugging tcp event [ task-id socket-id ]
undo debugging tcp event [ task-id socket-id ]
Centralized IRF devices–Distributed devices–In standalone mode:
debugging tcp event [ task-id socket-id slot-number ]
undo debugging tcp event [ task-id socket-id slot-number ]
Distributed devices–In IRF mode:
debugging tcp event [ task-id socket-id chassis-number slot-number ]
undo debugging tcp event [ task-id socket-id chassis-number slot-number ]
Default
TCP event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
task-id: Specifies the task ID in the range 1 to 100.
socket-id: Specifies the socket ID in the range 0 to 3072.
slot-number: Specifies the number of the slot that holds the card. (Distributed device.)
slot-number: Specifies the ID of the IRF member device. (Centralized IRF member device.)
chassis-number slot-number: Specifies the slot number of the card on an IRF member device. The
chassis-number argument refers to the ID of the IRF member device, and the slot-number argument refers
to the slot number where the card resides. (Distributed IRF member device.)
125