HP Comware 5 Debug Manual Vol 2

debugging udp packet
Use debugging udp packet to enable UDP packet debugging.
Use undo debugging udp packet to disable UDP packet debugging.
Syntax
Centralized devices:
debugging udp packet [ task-id socket-id ]
undo debugging udp packet [ task-id socket-id ]
Centralized IRF devices–Distributed devices–In standalone mode:
debugging udp packet [ task-id socket-id slot-number ]
undo debugging udp packet [ task-id socket-id slot-number ]
Distributed devices–In IRF mode:
debugging udp packet [ task-id socket-id chassis-number slot-number ]
undo debugging udp packet [ task-id socket-id chassis-number slot-number ]
Default
UDP packet debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
task-id: Specifies the task ID in the range 1 to 100.
socket-id: Specifies the socket ID in the range 0 to 3072.
slot-number: Specifies the number of the slot that holds the card. (Distributed devices.)
slot-number: Specifies the ID of the IRF member device. (Centralized IRF member devices.)
chassis-number slot-number: Specifies the slot number of the card on an IRF member device.
chassis-number refers to the ID of the IRF member device, and slot-number refers to the slot number where
the card resides. (Distributed IRF member devices.)
Examples
# Enable UDP packet debugging.
<Sysname> terminal debugging
<Sysname> debugging udp packet
# Execute a TFTP operation.
<Sysname> tftp 192.168.0.56 get 1.txt
Output similar to the following example is generated:
File will be transferred in binary mode
Downloading file from remote tftp server, please wait...
*Aug 3 06:05:25:800 2006 Sysname SOCKET/7/UDP:
129