HP Comware 5 Debug Manual Vol 2

IP source guard debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
Some information in this chapter is device type specific. Devices in this chapter are categorized
depending on their IRF capability and support for interface cards that use independent processors for
forwarding traffic, as shown in Table 1.
Table 102 Device types
Device type
Interface cards with
on-card processors
IRF capability Examples
Distributed devices Yes
No
HP 6600 routers (except
for 6602)
Yes (in standalone mode)
HP 12500 switches
HP 10500 switches
Distributed IRF devices Yes Yes (in IRF mode)
HP 12500 switches
HP 10500 switches
Centralized devices No No
HP MSR routers
HP 6602 router
Centralized IRF devices No Yes
HP 5800 switches
HP 5500 switches
debugging user-bind
Use debugging user-bind to enable debugging for user binding.
Use undo debugging user-bind to disable debugging for user binding.
Syntax
Centralized devices:
debugging user-bind { all | error | event }
undo debugging user-bind { all | error | event }
Distributed devices:
debugging user-bind { all | error | event } [ slot slot-number ]
undo debugging user-bind { all | error | event } [ slot slot-number ]
Distributed IRF devices:
debugging user-bind { all | error | event } [ chassis chassis-number slot slot-number ]
undo debugging user-bind { all | error | event } [ chassis chassis-number slot slot-number ]
Default
Debugging for user binding is disabled.
131