HP Comware 5 Debug Manual Vol 2

*Jun 12 09:51:19:884 2007 ipta IPTA/7/EVENT:
Service = duigong, TtyID = 1, Get server and its priority is 0
// A server with priority 0 is available for the duigong service and terminal 1.
*Jun 12 09:51:19:899 2007 ipta IPTA/7/PACKET:
Service = duigong, TtyID = 1,
Direction: Send data to terminal.
-----------------------------------------------
000: 0d 0a 3c 48 33 43 3e ..<H3C>
// The access router sent data to terminal 1 with content 0d 0a 3c 48 33 43 3 representing <H3C>. The
service name is duigong.
debugging ipta error
Use debugging ipta error to enable IP terminal access error debugging.
Use undo debugging ipta error to disable IP terminal access error debugging.
Syntax
debugging ipta error [ service service-name | terminal ttyid ]
undo debugging ipta error [ service service-name | terminal ttyid ]
Default
IP terminal access error debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
service service-name: Specifies a service by its name, a case-insensitive string of 1 to 15 characters,
including spaces.
terminal ttyid: Specifies a terminal by its ID, an integer in the range of 1 to 255.
Usage guidelines
Table 1 describes output fields and messages for the debugging ipta error command.
Table 105 Output from the debugging ipta error command
Field
Description
Fail to send disconnection one terminal message!
IP terminal access failed to send the message for
disconnecting the specified connection at the terminal
side.
Fail to send disconnection one service message!
IP terminal access failed to send the message for
disconnecting the specified connection at the service
side.
Fail to send disconnecting by service message!
IP terminal access failed to send the message for
disconnecting connections from the specified service.
136