HP Comware 5 Debug Manual Vol 2

Field
Description
Fail to send disconnecting by terminal message!
IP terminal access failed to send the message for
disconnecting connections from the specified terminal.
Fail to send disconnecting all terminal message!
IP terminal access failed to send the message for
disconnecting all connections at the terminal side.
Fail to send disconnecting all service message!
IP terminal access failed to send the message for
disconnecting all connections at the server side.
Fail to send suicide message!
IP terminal access failed to send the message for
canceling the task.
Fail to send undo service message !
IP terminal access failed to send the message for
deleting the service.
Fail to send undo terminal message !
IP terminal access failed to send the message for
deleting the terminal.
Fail to deal char!
IP terminal access failed to process characters
received from the server.
Examples
# Enable IP terminal access error debugging. Output similar to the following example is generated when
terminal 1 initiates a connection request for the cunkuan service under these conditions:
•
A service named cunkuan is created on the device.
•
Terminal 1 is created on the device.
<Sysname> debugging ipta error
<Sysname>
*Jun 11 15:14:28:398 2007 ipta IPTA/7/ERROR:
Service = cunkuan, TtyID = 1, The terminal is not allowed to use the service!
// Terminal 1 is not allowed to use the cunkuan service.
debugging ipta event
Use debugging ipta event to enable IP terminal access event debugging.
Use undo debugging ipta event to disable IP terminal access event debugging.
Syntax
debugging ipta event [ service service-name | terminal ttyid ]
undo debugging ipta event [ service service-name | terminal ttyid ]
Default
IP terminal access event debugging is disabled.
Views
User view
Default command level
1: Monitor level
137