HP Comware 5 Debug Manual Vol 2

Parameters
service service-name: Specifies a service by its name, a case-insensitive string of 1 to 15 characters,
including spaces.
terminal ttyid: Specifies a terminal by its ID, an integer in the range of 1 to 255.
Usage guidelines
Table 2 describes output fields and messages for the debugging ipta event command.
Table 106 Output from the debugging ipta event command
Field
Description
IPTA state: IPTA_TM_AAA_WAITINGPASSWORD
The IPTA connection is in waiting for the password
state.
IPTA state: IPTA_TM_AAA_WAITINGAUTHRES
The IPTA connection is in waiting for authentication
response state.
IPTA state: IPTA_TM_LINKED_NORMAL The IPTA connection is operating correctly.
IPTA state: IPTA_TM_LINKED_HALFHOTKEY
The IPTA connection is in matching half hotkeys state.
Some of the hotkeys are matched, while some of the
hotkey configurations might not be received yet.
Examples
# Enable IP terminal access event debugging. Output similar to the following example is generated when
you enter a character at the connection window under these conditions:
•
The cunkuan service and terminal 1 are created on the device.
•
A connection is established.
<Sysname> debugging ipta event
<Sysname>
*Jun 11 15:24:17:392 2007 ipta IPTA/7/EVENT:
Service = cunkuan, TtyID = 1, Receive ASYN_MESSAGE from terminal socket!
*Jun 11 15:24:17:392 2007 ipta IPTA/7/EVENT:
Service = cunkuan, TtyID = 1, Receive read-message from terminal!
*Jun 11 15:24:17:392 2007 ipta IPTA/7/EVENT:
Service = cunkuan, TtyID = 1, Receive data from terminal socket successfully!
// IP terminal access received a read-type asynchronous message from the socket of terminal 1. The
service name is cunkuan.
debugging ipta packet
Use debugging ipta packet to enable IP terminal access packet debugging.
Use undo debugging ipta packet to disable IP terminal access packet debugging.
Syntax
debugging ipta packet [ service service-name | terminal ttyid ] [ recv-server | recv-terminal |
send-server | send-terminal ]
undo debugging ipta packet [ service service-name | terminal ttyid ] [ recv-server | recv-terminal |
send-server | send-terminal ]
138