HP Comware 5 Debug Manual Vol 2

<Sysname> terminal monitor

<Sysname> debugging ipc event flowcontrol self-node

<Sysname> debugging ipc event flowcontrol node 5.

*Nov 28 16:57:51:173 2007 Sysname IPC/4/IPC EVENT:

IPC procedure flow-control event, node 5, queue type mixcast, queue ID 1.

// The local node (node

1) sent a flow control request to node 5.

*Nov 28 16:57:51:285 2007 Sysname IPC/4/IPC EVENT:Slot=5;

Received flow control request from node 1, queue type: mixcast, queue ID: 1.

// Node

received a flow control request from node

*Nov 28 16:57:51:445 2007 Sysname IPC/4/IPC EVENT:Slot=5;

The send queue (node ID: 1, queue type: mixcast, queue ID: 1) was freed from flow control.

// On node 5, flow control was removed from the mixcast queue for packets destined for node 1.

# Enable IPC ACK debugging for the local node. When the local node receives an acknowledgement

from the peer after it sends a request, output similar to the following example is generated:

<Sysname> terminal debugging

<Sysname> terminal monitor

<Sysname> debugging ipc event ack self-node

*Nov 28 19:47:51:297 2007 Sysname IPC/4/IPC EVENT:

Process ACK from node 5, queue type: unicast, queue ID: 3, ACK: 1202.

// The local node processed the acknowledgement from node

*Nov 28 19:47:51:433 2007 Sysname IPC/4/IPC EVENT:

Process ACK from node 5, queue type: multicast, queue ID: 8, ACK: 9499.

// The local node processed the acknowledgement from node

# Enable IPC internal event debugging for the local node. When a quick link transfer occurs, output

similar to the following example is generated:

<Sysname> terminal debugging

<Sysname> terminal monitor

<Sysname> debugging ipc event inner self-node

*Nov 28 20:09:23:953 2007 Sysname IPC/4/IPC EVENT:

Quick link transfer is detected between Node 6 and peer node 3.

// A quick link transfer occurred on the link between node

(the local node) and node

(the peer

node).

145