HP Comware 5 Debug Manual Vol 2

packet seq = 0, packet msg num = 1, packet length = 251.
// The IKE module parsed the received backup packet.
*Nov 20 15:31:36:009 2010 Backup IKE/7/DEBUG:
IKE_SYNCH: Processing synch-phase1-sa message, length = 239.
// The IKE module was processing the synch-phase1-sa message.
IKEv2 debugging commands
debugging ikev2
Use debugging ikev2 to enable IKEv2 debugging.
Use undo debugging ikev2 to disable IKEv2 debugging.
Syntax
debugging ikev2 { all | error | event | fsm | packet }
undo debugging ikev2 { all | error | event | fsm | packet }
Default
IKEv2 debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of IKEv2 debugging.
error: Specifies IKEv2 error debugging.
event: Specifies IKEv2 event debugging.
fsm: Specifies IKEv2 state machine debugging.
packet: Specifies IKEv2 packet debugging.
Usage guidelines
T a b l e 11 describes output fields and messages for the debugging ikev2 error command.
Table 122 Output from the debugging ikev2 error command
Field
Description
Msg_Receive: Received messages.
Responding with an INVALID_MAJOR_VERSION
notification.
The local end sent a notification to the peer that the IKE
version is not supported.
IKE_SA_INI[R] Msg_Recive:
Messages received by the responder in the
IKE_SA_INI phase.
IKE_SA_INI[I] Msg_Receive:
Messages received by the initiator in the IKE_SA_INI
phase.
172